Posts Tagged ‘Palm Harbor’

Grout cleaning Tampa: Removing sealer haze

Monday, January 24th, 2011

Sealer haze: Natural stone and grout surfaces can only hold a certain amount of sealer.

If excess sealer is left on the surface and it dries it could cause a smooth, silky white haze.

Sealer haze on the surface of tile and stone surfaces will wear off during normal foot traffic. Sealer haze on grout lines can be cleaned using a towel soaked with fresh sealer. This will dissolve the excess and can be wiped away.

In extreme conditions using a high ph tile and grout cleaner and a rotary scrubber can speed up the process of removal.

For professional stone, tile, and grout cleaning in Tampa bay area including Wesley Chapel, Lutz, Brandon, Valrico, Clearwater, St. Petersburg, Palm Harbor and Trinity area call 813-435-1331

Does Your Wood Floor Need to be Recoated or Refinished?

Thursday, March 4th, 2010

A complete refinishing may be necessary

National Cleaning Specialist of Tampa Bay recommends if areas of your floor have been worn down to the bare wood, if the floor has deep stains or color differences in the wood, if there’s chipping or peeling, or if your floor cannot be re coated due to factors discussed above, you’ll have to do a complete refinish.

If these signs are not readily apparent,you can use this simple test to determine what care your floors need:

  • Take this simple test
  • Find a high traffic area where the finish is likely to be the most worn, and pour a tablespoon of water onto the floor.
  • If the water beads up and you can wipe it without a trace, the finish is still working and you don’t need to do anything just yet.
  • If the water slowly soaks into the wood floor, creating a moderately darkish spot, the floor is partially worn. You may be able to get away with a recoating. Consult your wood flooring contractor for the best course of action.
  • If the water immediately disappears into the wood leaving an obvious dark spot, it’s time to refinish the floor.

For routine cleaning of wood floors by sweeping and vacuuming along with use of Squeaky Cleaner will maintain the floor’s original appearance. We also work with a recycling system, one option is bin hire Sydney they offer the best waste management service in Sydney, can be trusted with the removal of wastes from your homes and offices, so we can manage the furniture you don’t use or want, we work with Be Equipment for the recycling machinery so we will take care of yours !

There are a variety of textured floors, with each one offering a different coefficient friction.  The coefficient friction is the test result of how slippery a floor rates.  The higher the coefficent friction, the higher the slip-resistance.  There are a variety of aggregates that epoxy flooring contractors can broadcast into the uncured material: quartz sand, aluminum oxide, walnut shells, and glass beads.  Each one serves a different purpose, so it’s important that the estimator knows which material to use in each situation. Epoxy Floors NYC can install your commercial epoxy floor coating affordably and within a set time frame so as to cause minimal interruption to your working day.

National Cleaning Specialist serving Tampa,FL. since 1991

Call Now for Same Day Cleaning and Polishing 813-907-9092

Wood Floor Cleaning only $40 per room up to 100 Sq. Ft. 2 Rm Minimum


“Basic Coating”

Natural Stone and Grout Cleaner: Stain Removal Cleaner

Thursday, February 18th, 2010


New Cleaner Removes Deep “Set In” Stains

Insufficiently sealed and very porous stones can easily have their appearance adversely affected by spilled oil based materials, as well as by spilled colored beverages and Food

Spinergy StainAbsorb for Stone is an activated absorbent system that is easy-to-use and highly effective. When this product is properly utilized, it can pull out deep, set in stains without discoloring stone.

Spinergy StainAbsorb for Stone can eliminate water-born stains such as coffee, soda, tea, wine, juices etc.  For oil-born stains such as salad dressing, cooking oil, animal fat, etc., the poultice action is even more important.

StainAbsorb for Stone can be used on natural stone such as marble, granite, limestone, travertine, slate and sandstone.  It also works on grout for ceramic & porcelain tile, as well as masonry and concrete. Simply pour StainAbsorb for Stone onto the stained area, let it dry, and then sweep it away. StainAbsorb for Stone is a solvent free, V.O.C. free product that contains biodegradable surfactants.

IF you have a stained area or in need of floor cleaning please call National Cleaning Specialist at 813-907-9092 or Email us at Info@NationalClean.com