Posts Tagged ‘Lutz’

Grout cleaning Tampa: Removing sealer haze

Monday, January 24th, 2011

Sealer haze: Natural stone and grout surfaces can only hold a certain amount of sealer.

If excess sealer is left on the surface and it dries it could cause a smooth, silky white haze.

Sealer haze on the surface of tile and stone surfaces will wear off during normal foot traffic. Sealer haze on grout lines can be cleaned using a towel soaked with fresh sealer. This will dissolve the excess and can be wiped away.

In extreme conditions using a high ph tile and grout cleaner and a rotary scrubber can speed up the process of removal.

For professional stone, tile, and grout cleaning in Tampa bay area including Wesley Chapel, Lutz, Brandon, Valrico, Clearwater, St. Petersburg, Palm Harbor and Trinity area call 813-435-1331

Wood floor cleaning and refinishing: Removing Quick Shine Floor Finish from your hardwood floors

Monday, January 24th, 2011

 

National Cleaning Specialist of Tampa Bay can remove and restore wood floors. For removal of wood floor cleaners and floor finish call 813-435-1331 serving Tampa, Wesley Chapel, Brandon, Valrico, Clearwater, St. Petersburg and Lutz Florida areas.

We recently had a customer hire us to clean and remove the product ” Quick Shine Floor Finish and Orange Glow from her new laminate floors which had caused an uneven and blotchy sheen. The floor finish also showed its traces on the kitchen door, and so, the expertise of a hinged aluminium door replacement company was highly palpable. We were able to remove the product and clean her laminate floors following these steps

Products needed:

• Spray bottle (optional)

• Scotch-Brite abrasive pad (green scrub pad with yellow sponge-NOT an SOS, Brillo or steel wool pad)

• Soft towels

• New and well rinsed sponge mop OR terrycloth mop

• Rubber/latex gloves and safety goggles (recommended to prevent eye/skin irritation when handling IFT)

Process

It’s best to begin with a test section in an inconspicuous area (i.e. behind a door). We recommend working in

small sections as you complete this process. Complete all steps before moving onto another section of the

floor.

1. Apply a SMALL amount of the IFT solution to a section of the floor. Use a spray bottle to mist the floor

or squirt a small amount and spread it with a soft cloth. Apply only enough cleaner to wet the floor, and if you want to vacuum instead,

getting a review of shop vacs is great to find the best option for you.

2. Use the abrasive pad and scrub the area. This should remove the wax buildup.

3. After scrubbing the area, wipe the section with a water dampened cloth.

4. The final step is to apply Squeaky Cleaner with a microfiber mop. No water rinse is necessary after this

cleaner is applied. Wipe/mop the floor until it is dry – do not leave the floor wet, and if you have problems with plumbing, there are also plumbing companies which can help with this.

If this is successful in removing the contaminant, proceed with the rest of the floor, following all steps. You may

need to repeat steps 1 & 2 more than once.

If you are not successful in removing the contaminant with this process, you need to remove the remaining

product by abrading the floor (screening or sanding). It is recommended to hire a professional flooring

contractor if abrasion techniques are required. We know many reputable Melbourne cleaning services should anyone need to be pointed in the direction of good cleaning professionals. Study the Interstate Removalist Quotes prior to moving to a new place to discover excellent service at reasonable prices. Removing Holloway’s Quick Shine, Orange Glo, or many other wood floor care products can be a very tough, costly and fustrating job if you don’t know what you are doing. check this article If you are looking for Master Window Cleaners 

For help with cleaning or refinishing wood or laminate floors contact National Cleaning Specialist and USA city floors.

Or visit us on the web www.NationalClean.com

Carpet Cleaning Wesley Chapel: Ink Stain Removal

Thursday, December 30th, 2010

While cleaning carpet in Wesley Chapel, Florida today, we ran across a carpet that had several ink stains. The customer had rented a carpet cleaning machine which had made the ink stain spread into several large areas.

The first step we used in removing the carpet stain was to apply a product called Stain Zone. This was done around the spot which will help prevent the ink stain from spreading.

We then used a specialty spotter like P.I.G. to blot and remove as much as the color pigment as possible. We had to do this several times and went through two towels.

Once this was done we followed with All Solve to rinse the solvent from the carpet. We also applied a neutral carpet spotter to help remove the stain.

Once we went through these steps, we then rinsed the carpet with our Truck Mounted Hot Water Extraction process. The customer was very pleased with the results.

If you are in need of removing difficult stains from you carpets or just need a professional carpet cleaner serving Brandon, Valrico, New Tampa, Lutz and Land o Lakes area

Same Day Service  813-435-1331

Or schedule online at www.NationalClean.com

Same Day Service available