While cleaning carpets today, I had a customer ask me about a high traffic area in front of her sofa.
She had moved her sofa to a different location and there was an area in front of the sofa that appeared worn out. She wanted to know why that area still looked so bad after the cleaning.
I explained that sand and grit had scratched the face of the fiber causing it to be distorted.
If the carpet is fairly new, many customers will think that the carpet has worn out in those areas. Carpet manufacturers disagree with this term. They consider this as ugly out.
This could have been avoided by more frequent vacuuming and cleaning frequency. Proper door mats will also help in removing of the sand and grit that causes this type of condition.
Vacuuming should be done daily in the high traffic areas to prevent this from happening.
Professional Carpet Cleaning using a low moisture hot water extraction process, should be done at least every 12 to 18 months.
When choosing a professional carpet cleaning company, carpets do makes impact on house look but it also collects too much dirt. But if you don’t clean that dirt from carpet on time it will cause you health and skin related problems.
Choosing the cleaning solution that works best for that particular fiber construction will give the cleaner and home owner better results. When its time to choose a carpet cleaner make sure that the technicians coming in to your home have the technical knowledge on fiber identification.
National Cleaning Specialists has over 30 years of experience in cleaning Carpets, Rugs, Fine Fabrics and Floors. All of our technicians are certified by the Institute of Inspection, Cleaning and Restoration Certification which means that we will provide you with the experience you need to get the cleanest floors possible.
Clean any 3 rooms of carpeting for only $105.00.
Call Today for Same Day Appointments: 813-907-9092
Cleaning carpets in the Tampa Bay area should consist of 4 fundamental processes to achieve the cleanest results
At National Cleaning Specialists, we first identify the carpet construction to determine what type of cleaning agents will provide the safest and most effective results. Once this is done, with the help from our friends at Unclutterer, we then pre inspect the carpet areas being cleaned to determine the amount of soiling, stains, and any installation problems prior to cleaning. Choosing the proper stain removal process is key to having success with removing stains, even if involve the use of power washing services, go online and discover more about Gettysburg Powerwashing Pros and how to use these services for your carpet cleaning as well.
There are four steps that should be done if you want clean carpets.
1. Dry soil removal: This process is accomplished with using a high powered Vacuum Cleaning Services and brush system. By doing this first, it will remove more sand and dirt from your carpets. Most non professional carpet cleaners do not vacuum the carpet prior to cleaning. Most experts would agree that the 85% of soil found in carpets is dry soil. This type of soiling is insoluble, which means it can not be broken down with use of water base cleaning agents or solvents. The most effective way is to vacuum the carpets prior to cleaning. 2. Soil Suspension: An example of this is the wash cycle in your washing machine. This is accomplished by using an alkaline pre conditioner to treat the areas prior to cleaning. This helps in suspending the oily residues for removal. ? 3. Ph balancing rinse: With the use of special cleaning agents, this process removes the suspended soils from the carpet and also neutralizes the previous cleaning agents. The carpet is free of any residue and left clean and soft 4. Spotting: If any spots remain professional spotting agents should be used. Some difficult stains such as ink, mustard, and coffee will most likely need specialty spotters to remove.
But don’t forget that the easiest way to clean carpets it’s with a washing machine. I looked up washing machine repair near me and they told me that some parts of my machine were not working pretty well and they gave me stronger parts.
There are other steps involved in cleaning carpets but these mentioned are the bare minimum in order to achieve Clean Carpets.
National Clean uses a unique 13 Step Cleaning process to achieve Maximum Soil Removal and Maximum Stain Removal.
Welcome to National Clean Blog. Our highly trained Floor Care Technicians specializes in various Floor Cleaning methods in both the commercial and residential settings. We utilize state of the Art cleaning equipment: wet and dry extraction methods on Carpets, Upholstery, Tile and Grout cleaning, Hardwood Floor Refinishing, Dryer Duct and Air Vent Cleaning
