National Cleaning Specialist of Tampa Bay can remove and restore wood floors. For removal of wood floor cleaners and floor finish call 813-435-1331 serving Tampa, Wesley Chapel, Brandon, Valrico, Clearwater, St. Petersburg and Lutz Florida areas.

We recently had a customer hire us to clean and remove the product ” Quick Shine Floor Finish and Orange Glow from her new laminate floors which had caused an uneven and blotchy sheen. The floor finish also showed its traces on the kitchen door, and so, the expertise of a hinged aluminium door replacement company was highly palpable. We were able to remove the product and clean her laminate floors following these steps

Products needed:

• Spray bottle (optional)

• Scotch-Brite abrasive pad (green scrub pad with yellow sponge-NOT an SOS, Brillo or steel wool pad)

• Soft towels

• New and well rinsed sponge mop OR terrycloth mop

• Rubber/latex gloves and safety goggles (recommended to prevent eye/skin irritation when handling IFT)

Process

It’s best to begin with a test section in an inconspicuous area (i.e. behind a door). We recommend working in

small sections as you complete this process. Complete all steps before moving onto another section of the

floor.

1. Apply a SMALL amount of the IFT solution to a section of the floor. Use a spray bottle to mist the floor

or squirt a small amount and spread it with a soft cloth. Apply only enough cleaner to wet the floor, and if you want to vacuum instead,

getting a review of shop vacs is great to find the best option for you.

2. Use the abrasive pad and scrub the area. This should remove the wax buildup.

3. After scrubbing the area, wipe the section with a water dampened cloth.

4. The final step is to apply Squeaky Cleaner with a microfiber mop. No water rinse is necessary after this

cleaner is applied. Wipe/mop the floor until it is dry – do not leave the floor wet, and if you have problems with plumbing, there are also plumbing companies which can help with this.

If this is successful in removing the contaminant, proceed with the rest of the floor, following all steps. You may

need to repeat steps 1 & 2 more than once.

If you are not successful in removing the contaminant with this process, you need to remove the remaining

product by abrading the floor (screening or sanding). It is recommended to hire a professional flooring

contractor if abrasion techniques are required. We know many reputable Melbourne cleaning services should anyone need to be pointed in the direction of good cleaning professionals. Study the Interstate Removalist Quotes prior to moving to a new place to discover excellent service at reasonable prices. Removing Holloway’s Quick Shine, Orange Glo, or many other wood floor care products can be a very tough, costly and fustrating job if you don’t know what you are doing. check this article If you are looking for Master Window Cleaners 

For help with cleaning or refinishing wood or laminate floors contact National Cleaning Specialist and USA city floors.

Or visit us on the web www.NationalClean.com